Tag: craft class

Colour INKspiration 15

Hi Everyone.  Welcome to our next Colour INKspiration Challenge – number 15 to be exact!

How does Colour INKspiration work?  I’m glad you asked!

We are a group of Stampin’ Up! Demonstrators from Australia and New Zealand who, every 2nd and 4th Wednesday of each month, create projects using inspired colour Combinations from pinterest.  It’s loads of fun and we LOVE you to play along.  So take the hop, be inspired, create your own work of art and then play along over in our Facebook Page!

This week’s colour challenge image is below:

Our palette this week is Elegant Eggplant; Bermuda Bay; Lemon Lime Twist and Pool Party.

I was just a bit excited by this challenge as I don’t use Elegant Eggplant very much, and as much as I LOVE our new Lemon Lime Twist Colour – I REALLY struggle to use it in colour combinations.  So this challenge was a fun way to give me a stretch!  And just because I don’t use those colours very much – I really wanted them to be the feature of my card!

Colour INKspiration 15 featuring Lovely Inside and Out by Stampin Up with the new Lemon Lime Twist!

 I started with a piece of Shimmery White cardstock and splashed on some Lemon Lime Twist with my aqua painter, then followed that up with some touches of Elegant Eggplant wear the framelit would cut. Once that had dried, I cut out the framelit and trimmed the ‘friend’ out of the oval.  I cut the framelit a further 3 times in whisper white, trimmed all the ‘friends’, then layered them together with the Fine Tip Glue Pen, before covering the entire word with the fine tip glue for a glossy look.

The background was created by stamping the ‘raindrops’ in Pool Party on the backing piece of whisper white, tracing the outline of the framelit and then picking out a selection of Pool Party sequins from the Iridescent Sequin Assortment pack and adhering them in place (a tip I saw on Jennifer McGuire’s video’s).  I really liked the idea instead of a shaker card, so you can permanently see the sequins in the background.  I popped a piece of window sheet behind the framelit cut out and adhered an Elegant Eggplant sentiment piece that I had cut with the Layering Oval Framelits to give me an outline.

Some more watercoloring on Shimmery White with Pool Party and Bermuda Bay before cutting with little flowers from the Blooming Heart Thinlets, helped finish off the overall look – with a good smothering of Wink of Stellar of course! Lol.

Colour INKspiration 15 featuring Lovely Inside and Out by Stampin Up from Mel Pagano at My Paper Oasis

We can’t wait to see what you create with this combination!

Now it’s time to hop on over to see what Jackie has created

Happy Creating everyone!

 

 

Product List

Magical Mermaid Shaker Card

Hi Everyone.

 

I couldn’t resist popping back so quickly to share another of my Magical Mermaid cards. I told you I LOVED this set! This time I decided to create a shaker card in purple and pink hues.

Magical Mermaid Shaker Card

The base of this card was created during my Sunday Night Live Video on Facebook, where I demonstrated how to create the same background on my mermaid card in the recent CASEing the Catty blog hop.  You can see that one HERE.

I told everyone that I would finish off the card in these ‘New’ colours and show you all.

Well, here it is!

Magical Mermaid Shaker Card by Mel Pagano at My Paper Oasis, Stampin' Up!, Watercolour backgrounds with video link

This one has so many of our gorgeous new products. The colours are 3 of our new In Colour Range – Powder Pink, Berry Burst and Fresh Fig. And our New Iridescent Sequin Assortment suited this shaker card perfectly.

The Mermaid’s beautiful glossy tail is again achieved by first watercoloring the image and gradually building and blending layers, before coating the whole thing with the Fine Tip Glue Pen.  It gives of such a glossy smooth finish – and no sticky feel AT ALL! Definitely one to add to your tool kit!

For some added bling I popped on a couple of our New Glitter Enamel Dots!

Take a look at my Video HERE to see just how easy these beautiful watercolour backgrounds are to create!

 

I have an amazing special running for the month of June so you can get a Big Bang with your New In Colours Purchase with some coordinating FREE accessories! Everything you need to start creating right away!

SHOP ONLINE FROM ANYWHERE IN AUSTRALIA

use Hostess Code XDX3XUUA for your free In Colour accessory pack.

Happy Crafting

Product List

CTC 133 – Love and Sympathy with Magical Mermaid

It’s time for another CASEing the Catty!

This week we are CASEing the Love and Sympathy Section of the New Catalogue on pages 86 – 101.

If we are CASEing the Love and Sympathy section how can you be using Magical Mermaid I hear you ask!  Well remember that CASEing the Catty means to Copy And Share Everything (or Copy And Selectively Edit).  That means we can take inspiration for ANYTHING in those catalogue pages – stamps, layouts, colours, backgrounds, boxes…..anything!

And that means you can too!!!  So take the hop, be inspired, create your own and hop on over to our Facebook page to upload your design straight to the wall – no blog necessary!

I took lots of inspiration this week from the multiple backgrounds that you can find on lots of the cards in this section this week.

Take a look – the backgrounds to lots of the cards are either stamped, sponged, embossed or watercoloured – just like this one ….

So I decided to make a background worthy of setting off a gorgeous mermaid!  My daughter is all about flamingos…before that, it was unicorns, but  I LOOOVVEEEEE Mermaids – they’re kind of my thing.

CTC 133 - Love and Sympathy using Magical Mermaid by Mel Pagano at My Paper Oasis, watercolored backgrounds, stampin up, embossing paste

I began by watercoloring on a piece of Shimmery White Cardstock using Pool Party, Pacific Point and Emerald envy reinkers.  I then used the ‘waves’ die from the Swirly Scribbles Thinlets to cut a mask so I could use a sponge dauber, versamark and clear embossing powder to mimic the movement of the ocean in the water coloured background. You have to do this a few times! Over that I stamped the seaweed image in versamark and heat set with white embossing powder. I then went back and dropped small blobs (technical term) water over the image, let it sit for a minute before patting off with paper towel

One of the most fun parts though was colouring the embossing paste with a crumb cake reinker and smearing it along the base of the card. Once it had dried I stamped right over the top of it with the Soft Suede ink … did you know you could do that?  It does have to be reasonably smooth to get a good image.

My mermaids tail is also watercoloured using just the Emerald Envy and Pacific Point reinkers.  Even though it was stamped onto Shimmery White cardstock, I still felt it could do with more shimmer. So I hit it with the clear Wink of Stellar Pen before covering it with the Fine Tip Glue Pen and letting it dry!  The result is amazing!!!

CTC 133 Love and Sympathy using Magical Mermaid by Mel Pagano at My Paper Oasis, Stampin' Up!, watercoloring, embossing paste

Not even this picture can do it justice!  I need to play with more colours – so I’m sure you will see more of this lovely new stamp from me!

Now it’s time to hop on over to the lovely Julia Quinn to see what she has created for you all!

 

Happy Crafting 🙂

 

Shop Supplies from anywhere in Australia

 

 

Product List

3D Flower Making using Flower Shop

Hi everyone,

I have had loads of interest in how I made my 3D flowers using the Flower Shop Stamp set on the top of my Windows Hexagon Box, as seen in the CASEing the Catty Challenge a couple of weeks ago.   You remember the one……

CTC125 Antique Window Box design by My Paper Oasis, stampin up, flower shop

Here’s the link to that post – CTC 125

So I thought I would pop past and show you what you will need and the link to my brand new ‘How To’ Video on You Tube  showing you exactly what to do!

Essential Tools:

You will need a

: Flower Shop Stamp Set

:Pansy Punch

:ink pad

:bone folder

:tooth pick or similar

:tombow multipurpose liquid adhesive

:hot glue gun

Here’s a picture of the petals you will need to complete the flower –

How to create stunning 3D flowers using the Flower Shop Stamp and Pansy Punch by My Paper Oasis, Stampin' Up!, 3D flowers, paper flower art

You need 4 full flowers to being with.

Trim the first flower by removing one petal as shown (keep all petals).

Trim the second flower by keeping only 2 petals joined together.

The third flower remains while with just a snip straight into the centre of the flower.

The fourth flower is completing whole.

Watch my video over at My Paper Oasis HERE to see just how to put it altogether 🙂

Happy Crafting!

Don’t forget, there are still loads of discounted items available on the retiring list!

Shop Supplies or the Retiring List by clicking the image below!

Product List

CTC 125 – Favourite Bigshot Project!

Hi crafty friends and welcome!

It’s Sunday night, so that means it’s time for another CASEing the Catty blog hop.  I’m pretty excited about this weeks challenge!  We get to showcase our favourite Big Shot project from the occasions catalogue!

How hard was it to choose! I mean, the Occasions Catalogue had so many great Big Shot projects.  The Lift Me Up Bundle, Custom Tee’s, Nailed It, So Succulent Bundle and not to mention the So Detailed Thinlets, Cool Treats and Dragonfly Dreams!

But for me – well, let’s just say that I am an absolute sucker for a box – so my choice for this weeks challenge just had to be the Window Box Die.

I had seen a picture from Pauline Barnfather at icreatecraft, who had designed a timber like box. I immediately fell in love with it and have been wanting to create my own version since. So this was my chance.  I really wanted to create an antique style box, that reminded me a little of an old jewellery box.  Some Soft Suede cardstock stamped with the Hardwood stamp helped me easily achieve that!

CTC125 Antique Window Box design by My Paper Oasis, stampin up, flower shop

I am so happy with the way it turned out.  Once I created the box I knew it needed some beautiful flowers to top it off.  I haven’t created these flowers for a few years now, so it was fun to really play and make them again.  I used the Flower Shop stamp and co-ordinating punch to create them.  Here’s a better look at the top for you.

CTC125 Antique Window Box design by My Paper Oasis, stampin up, flower shop

Luckily I had kept hold of my retired Antique Brads from a couple of years ago.  I think it really enhances the antique feel of the box perfectly and acts like a little handle to lift the lid open!

You can take a look at how I created these flowers, with my You Tube Link,  at this post – 3D Flower Making.

I hope you have enjoyed tonight’s project.  Now it’s time to hop on over to the lovely Judy May and see what beautiful project she has created for you!

Keep Crafting!

Grab everything you need by clicking the shop now button!  Don’t forget to take a look at the retiring list to save up to 50% off!

Product List